Obihai OBi1062 Administration Manual page 190

X_InboundCallRoute
X_RegisterEnable
X_NoRegNoCall
X_KeepAliveEnable
X_KeepAliveExpires
X_KeepAliveServer
X_KeepAliveServerPort
X_KeepAliveMsgType
X_CustomKeepAliveMsg
Choices are A, or B
Routing rule for directing incoming calls on this service.
The default rule is to send all incoming calls to the
PHONE port (ph). See OBi Call Routing and Digit Map
Section for a description of the syntaxes for specifying
this parameter
Enable registration for this line. If set to YES, device
sends periodic SIP REGISTER to the service provider
according to the settings in the ITSP Profile. Otherwise,
device does not send any SIP REGISTER for the service
Enable this option to disallow incoming and outgoing
calls if registration with the service provider is not
successful
Enable sending keep alive message. If set to YES, device
sends periodic keep-alive messages to the destination
specified in X_KeepAliveServer and
X_KeepAliveServerPort, at the interval specified in
X_KeepAliveExpires. The content of this message is the
ASCII string "keep-alive\r\n"
Keep alive period in seconds
Hostname or IP address of keep alive server
UDP port of the keep alive server
The type of keep alive messages to send out periodically
if keep-alive is enabled. It can be one of the following
choices:
- keep-alive: The string "keep-alive"
- empty: A blank line
- stun: A standard STUN binding request; device
will use the binding response to form its contact
address for REGISTRATION
- custom: use the value of
X_CustomeKeepAliveMsg (note: option not available on
OBi100/OBi110)
Defines the custom message to be used when
X_KeepAliveMsgType is "custom". The value should
have the following format:
mtd=NOTIFY;event=<whatever>;user=<anyone>
Where
- NOTIFY may be replaced by any other SIP
method, such as PING,
- event parameter is optional and is only
applicable if method is NOTIFY. If event is not specified,
the 'keep-alive' event will be used with NOTIFY
- user parameter is optional; if not specieifed,
the request-uri will not have a userid, and the TO
header field will use the same userid as the FROM
Copyright 2010-2015 Obihai Technology, Inc.
ph
true
false
false
15
5060
keep-alive
190