Related Manuals for DIGITAL YACHT Aqua PC Q
Summary of Contents for DIGITAL YACHT Aqua PC Q
- Page 1 Installation & Quick Start Guide Aqua PC Range – Standard Aqua PC Version 2 QUICK START Aqua 2 PC VR2.00...
- Page 2 Congratulations on the purchase of your Aqua PC. It is recommended that your new computer is installed by a professional installer. The Aqua Standard PC is 12v ONLY and must not be connected directly to a 24v DC supply. Please consult your dealer or with Digital Yacht on suitable 24v to 12v DC-DC adaptors. ...
- Page 3 Aqua PC Quick Start Guide DIGITAL YACHT LTD Installation Step 2 The Aqua PC is supplied with four mounting brackets which are screwed (wrong way round) to the base of the Aqua PC for transit. Unscrew the brackets, reverse them and screw them back in place. Use suitable fixings (not supplied) to fix the Aqua PC to a flat surface –...
- Page 4 Aqua PC Quick Start Guide DIGITAL YACHT LTD Installation Step 3 On the rear of the Aqua PC is a single black cable that has eight wires. This is the Power/IO cable. Connect the Red (+) and Black (-) wires in the Power/IO cable to the ship’s 12v DC supply.
- Page 5 Aqua PC Quick Start Guide DIGITAL YACHT LTD To connect NMEA devices to the Aqua PC you can connect them directly to the two COM port wires in the Power/IO cable. A couple of typical examples are shown below;...
Need help?
Do you have a question about the Aqua PC Q and is the answer not in the manual?
Questions and answers