Party Mode; Holiday Mode; Off Mode; Reset - Alpha EASY-STAT2 User Manual

h. Party Mode
When the device is operating in the AUTO mode, press the Mode button 4 times
until the party appears, then press OK.
This mode runs at the set temperature during a defined period, set by the user from 1 to 23
hours.
Press the Increase (+) or Decrease (-) button to select the required room temperature, then
press OK.
Press the Increase (+) or Decrease (-) button to select the required number of hours, then
press OK.
At the end of the set period the device returns to the previous mode before the party mode
was selected.
To cancel this mode at any time and return to AUTO. Press and hold the Esc button for at
least 3 seconds.
i. Holiday Mode
When the device is operating in the AUTO mode, press the Mode button 5 times until the
holiday appears, then press OK.
In this mode a room temperature can be selected for upto 90 days.
Press the Increase (+) or Decrease (-) button to select the required room temperature, then
press OK.
Press the Increase (+) or Decrease (-) button to select the required number of days, then
press OK.
After the selected number of days have passed, the device returns to AUTO.
To cancel this mode at any time and return to AUTO, press and hold the Esc button for at
least 3 seconds.
j. OFF Mode
This mode is activated when the ON/OFF/Esc button is pressed and held down for more
than 3 seconds.
This mode completely switches off the device, apart from the frost protection function at a
minimum 5°C.
OFF appears in the display until the device is turned back on. To turn the device back on,
press the ON/OFF/Esc button for more than 5 seconds.
k. Reset
Pressing the 'RESET' button will restart all internal routines and then revert back to 'AUTO'
mode. All previous time, date, temperature and programming data is retained. Use the
'RESET' button when any incorrect function is displayed.
7