Set Heating Programme - Alpha EASY-STAT2 User Manual

c. Set Heating Programme
Press the Set button until DATE Menu is displayed. Press the Increase (+) button until
PROG Menu is displayed. Press the OK button to enter the programme menu.
Using the Forward (+) or Backward (-) button, pre-set blocks Monday to Sunday, Monday to
Friday, Saturday to Sunday, Individual days or your own blocks can be selected.
To programme pre-set blocks of days - Using the Forward (+) and Backward (-) buttons,
pre-set blocks Mon - Sun, Mon - Fri and Sat - Sun will flash. Press OK when the required
block is flashing. Then select the programme required for this block as described in 'Select a
programme' below.
To programme individual days - Press the Forward (+) or Backward (-) buttons until individual
days are flashing. When the required day is flashing, press SET and then OK. Then select the
programme required for that day as described in 'Select a programme' below.
To programme user selected blocks of days - Press the Forward (+) or Backward (-)
buttons until the individual day required is flashing. Press SET, the next day will flash. Use
the Forward (+) or Backward (-) buttons to select the next day required for your block, then
press SET. Repeat this for each day required in your block. Press OK when all the required
days have been selected. Then select the programme required for this block as described in
'Select a programme' below.
Select a programme - There are four pre-set programmes, P1 to P4. You can view the pre-set
programmes in the display by pressing the Increase (+) or Decrease (-) buttons and accept the
one you require by pressing OK 2 times. If you wish to programme your own sequence, select
Pd and press OK.
P1: ON between 6 AM to 8 AM
ON between 6 PM to 10 PM
P2: ON between 7 AM to 10 AM
ON between 12 PM to 10 PM
P3: ON between 6 AM to 8 AM
ON between 12 PM to 2 PM
ON between 6 PM to 10 PM
P4: ON between 6 AM to 12 PM
ON between 6 PM to 10 PM
Pd: User required programme.
For Pd press OK once and programme as follows:-
Starting at 00:00hr use the Increase (+) or Decrease (-) button to set the desired temperature
(the default temperature is 15°C which can be increased or decreased as required), then press
the Forward (+) or Backward (-) button to copy previously chosen temperature. The user has
the ability to choose their required temperature and time programme per day as shown in Fig.
6. Press OK to confirm. Repeat for each block, day or block of days.
5