Removing Seat Rails; U.seat Saddle Adjustment; Sideguard Hardware - Quickie Q2 Lite Owner's Manual

Hide thumbs Also See for Q2 Lite:

Table of Contents

E NG LIS H

T. REMOVING SEAT RAILS

Detach seat rails by removing the two bolts (A) attaching the seat rail (B) to the cross brace.

U. SEAT SADDLE ADJUSTMENT

The Quickie 2 features two seat rail connection settings using a reversible seat saddle (C). The "dynamic" posi-

tion (shown) allows for a more rigid seat rail connection. The "classic" position (not shown) provides the cur-

rent tension ideal for folding and unfolding the chair.

To adjust the saddle into either "classic" or "dynamic" position, simply remove the allen bolt (D), reverse the

saddle (C) and retighten.

V. SIDEGUARD HARDWARE

Installation of sideguard hardware

a. Position outer receiver hardware (E) on frame.

b. On corresponding inside of the frame position inner clamping hardware (F)

c. Insert two bolts (G) with washer and tighten using 3/16 inch hex key

d. Your sideguard (H) can now be inserted into the receiver.

NOTE–

After installing the receiver hardware and inserting the side guard, check for interference. Don't

operate the wheelchair if the side guard interferes with any of the other components.

MK-100071 RevA

IX. DEALER SERVICE AND ADJUSTMENT

Table of Contents