WAGO TP343 Manual page 11

Fig.14
This strip guide can be removed from the printer by pulling the green guides apart. The
strip guide must then be fitted to accommodate what will be printed; e.g., if printing an
11-mm markingSTRIP, then the guide should be fitted with the short side downward. If
switching to a 7.5-mm markingSTRIP, then simply turn the strip guide over.
Top strip guide
The strip guide projects by approx. 3.5 mm
at the bottom. This projection is important
for printing 7.5-mm markingSTRIP.
Fig.13
<___>
11