Overview Note: Check for visible shipping damage. Shipping damage will cause problems in the operation of this unit. Contact the Customer Service Hotline immediately if there are missing or damaged parts. DO NOT return this product to the store. Item Description Nozzle connector Spray lance...
Important Safety Precautions Safety Overview This unit was designed for specific applications. It 6. Keep work area free of obstacles. Remove should not be modified or used for any application loose objects from spray path. Secure light other than that for which it was designed. objects to be cleaned.
Page 4
Important Safety Precautions – continued Important Safety Precautions – continued Safety Precautions – continued Water Supply (Cold Water Only) 22. DO NOT allow your pressure washer to freeze This pressure washer must only be used with during colder months. Damage as a result of clean water;...
Assembly Instructions NOTE: Check for visible shipping damage. Shipping damage will cause problems in the operation of this unit. Contact the Customer Service Hotline immediately if there are missing or damaged parts. DO NOT return this product to the store. Step 1 Step 2 Step 3...
Operating Instructions WARNING: THE ENGINE IS SHIPPED WITHOUT OIL. Fill engine with the recommended oil to the indicated level before operating the unit. GX series engines will not start without the correct oil level. Please refer to the Honda Engine Owner's Manual for details. Step 1 Step 2 Step 3...
Using the Accessories CAUTION: Your pressure washer operates at fluid pressures and velocities high enough to cause property damage. Before cleaning any surface, choose an inconspicuous area to test spray pattern and distance for maximum cleaning results. If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.
Working with Detergent Detergent Overview WARNING! To enhance the efficiency of the pressure washer, • Never use bleach, chlorine products and sometimes it is necessary to use detergents to other corrosive chemicals help loosen tough dirt and grime. • Never use liquids containing solvents (i.e., paint thinners, gasoline, oils) CAUTION: This machine has been designed for •...
Shutdown Instructions Thermal Protection Valve Your pressure washer is equipped with a thermal protection valve, located at the base of the pump. If the engine is left running for an extended time with the gun closed, the pressure washer will vent water into the atmosphere through this valve.
Storage, Winterizing & Transport Storage CAUTION: Always follow Shutdown Instructions 1. Shut off water supply and relieve pressure in on page 8 before storing the pressure washer or the spray gun by depressing the trigger. the accessories. For your own safety, be sure to 2.
Basic Maintenance – continued Water Screen Pump Oil Change CAUTION: If the screen is not kept clean, the NOTE: Check the pump before every use as well flow of water to the pressure washer will be as the system components. Check Pump oil level restricted and the pump may be damaged.
Troubleshooting IMPORTANT: Always follow the Shutdown Instructions (see page 8) before working on the unit or the accessories. Always discharge residual pressure and turn the engine OFF. Symptom Possible Cause Solution Engine will not start. No gasoline. Fill gas tank. Oil level low Add oil Engine throttle is not in...
Page 13
Troubleshooting – continued IMPORTANT: Always follow the Shutdown Instructions (see page 8) before working on the unit or the accessories. Always discharge residual pressure and turn the engine OFF. Symptom Possible Cause Solution Gun/lance assembly Spray lance not Ensure the spray lance is connected or spray lance leaks.
Damage in transit is NOT covered by warranty. Warranty is void if any devices or accessories other than those distributed or recommended by Kodiak are attached to or connected with the equipment in such a manner that the original factory construction is altered.