Backlight Level; Language; Factory Reset; Software Version - View Quest Hepburn Operation Manual

GB
5. To turn o the Alarm, press the POWER or ALARM buttons when the alarm is sounding.
6. To cancel Alarm, refer to steps1-3 to set Alarm states to 'O ' .

Backlight Level

To change the backlight level of standby mode and power on mode, press SNOOZE repeatedly while alarm is not
sounding. Or using the menu:
1. Press the MENU button and then turn the - TUNING + knob to select System menu. Press the - TUNING + knob to
con rm.
2. Turn the - TUNING + knob to select Backlight menu and press the - TUNING + knob to con rm.
3. Turn the - TUNING + knob to select backlight level, and press the - TUNING + knob to con rm the setting.
Power On - High
Medium
Low

Language

1. Press the MENU button, and then turn the - TUNING + knob to select System menu. Press the - TUNING + knob to
con rm.
2. Turn the - TUNING + knob to select Language menu and press the - TUNING + knob to con rm.
3. Turn the - TUNING + knob to select language and press the - TUNING + knob to con rm.

Factory Reset

Factory reset resets all user settings to default values, so time/date, alarm settings, presets and Bluetooth settings are
lost.
1. Press the MENU button, turn the –TUNING+ knob if necessary to select System menu and press the - TUNING +
knob to con rm. Then turn the - TUNING + knob to select Factory Reset. Press the - TUNING + knob to con rm.
2. Turn the - TUNING + knob to 'Yes' , and then press the - TUNING + knob to con rm. Display will show "Restarting"
and your Hepburn will reset to Factory settings.

Software Version

Note: The helpdesk may ask you for the software version of your product.
1. Press the MENU button, and then turn the - TUNING + knob to select SW Version. Press the - TUNING + knob to
con rm. Display will show "SW Version" and below it your Hepburn's software version, scrolling as necessary.
27
Standby -
High
Medium
Low
Hepburn Operation Guide