Enjoying Your Bluetooth Device With The View Quest App - View Quest Hepburn Operation Manual

GB
To select one of your preset frequencies, scroll the list if necessary and tap the frequency you wish to tune to.
To add the currently playing station to your presets tap Add Preset [icon] at the top left of the Preset panel. This will
display a green Select button
wish to hold the current frequency.

Enjoying your Bluetooth device with the View Quest App

[note] The View Quest App in Smart Device mode works in conjunction with the audio player on the tablet or smartphone
you are using as a remote. The App cannot control another Bluetooth device.
[] mode: to select Smart Device tap Mode [icon] then tap Smart Device.
= mode: to select Smart Device just tap Smart Device in the Mode panel.
In [] mode the ViewQuest App will display the Now Playing panel. You can select it again by tapping the Now
Playing button
mode all the panels are visible, the Now Playing panel is on the right.
In =
The Now Playing panel in Smart Device mode
The Now Playing panel does not display any audio information in Smart Device mode. Use the audio player in your
remote to select albums or playlists.
Now Playing options for Smart Device:
Volume Slider
23
next to every preset. Tap the green Select button next to the preset you
at the bottom of the display.
Mute or unmute
Set output volume
Toggles between play and pause for the current track
Go to start of current – play previous/play next track
Hepburn Operation Guide