Related Manuals for Grandbeing MX0808-310
Summary of Contents for Grandbeing MX0808-310
- Page 1 MX0808-310 Operating Instructions ® Grandbeing HDMI Matrix (Routing Type) MX0808-310 （P/N of this Instructions is INSMX0808-310） Model No. Instruction update date (version): 2009/5/31 ® １ GRANDBEING...
- Page 2 Please keep this manual for future reference. Notice Grandbeing Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
- Page 3 MX0808-310 Operating Instructions TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE: 1) DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
-
Page 4: Table Of Contents
MX0808-310 Operating Instructions TABLE OF CONTENTS Introduction·············································································5 Package Contents ····································································5 Panel Descriptions ···································································6 Connect and Operation ·····························································7 Specification ········································································· 19 Typical Application·································································· 20 Maintenance ········································································· 20 Product Service ····································································· 20 Warranty ·············································································· 21 Contact Information ································································ 22 ® ４ GRANDBEING... -
Page 5: Introduction
MX0808-310 Operating Instructions INTRODUCTION Grandbeing’s MX0808-310 is an 8-by-8 DVI/HDMI true matrix. It allows any of the eight source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be routed to any of the eight displays simultaneously, no matter the source is HDCP or not. -
Page 6: Panel Descriptions
MX0808-310 Operating Instructions PANEL DESCRIPTIONS Front panel 1. Power switch. 2. Output selection push button(Use it to choose the output channel you want to change). 3. LED indicator of input for output port 1 to 8. 4. Action Confirmation button(Push the ‘Enter’ button to confirm the changing of input channel to the output). -
Page 7: Connect And Operation
HDMI outputs (such as HD-LCD, HD-DLP) into MX0808-310. 3 Connect two CAT-5E cables to both the STP/UTP outputs of MX0808-310 and inputs of STP/UTP receiver(such as EX0101-U31/33/51/53 etc). Please pay attention to the sequence of the two cables, CAT5e-1->CAT5e1, CAT5e-2->CAT5e2 .(The cable termination must follow the standard of... - Page 8 MX0808-310 Operating Instructions Second: Rotate the input select knob to choose the desired input channel. Third: Press the ‘Enter’ button to confirm the action. Then the LED stops blinking. （2）Control via RS232. 1）. The Interface of MX0808_COMCTL ® ８ GRANDBEING...
- Page 9 MX0808-310 Operating Instructions 2）. The Message Window Receive Window The “receive window” will show the message received from MX0808. When you click the Control Buttons (see step 4) or send Control Command (see 2.3) to MX0808, it will send out the message about “operation results”...
- Page 10 MX0808-310 Operating Instructions 2.3） Send Window Input the control command in this window. The control command use ASCII. 2.4 mode button Click this button to set the switch mode: Quick switch or Normal switch.when you click this button it will read the current mode of mx0808,if you want to change the mode, select the mode you want and click OK.
- Page 11 MX0808-310 Operating Instructions 4）Control command format If user want to write his own control software, below are data format and baud rate setting. Com port setting: Baud Rate: 9600 bps Data bits: 8 bits Parity: None Stop bits: 1 bit...
- Page 12 MX0808-310 Operating Instructions When you send a control command to the MX0808, if succeed, it will feedback current output port status to show which input port is selected. The return status format is as follows: “s” Output port Input port...
- Page 13 MX0808-310 Operating Instructions （3）LAN control (Note:Use the direct UTP cable to connect with PC, or use cross cable to connect to the Ethernet switcher) 1) When NETCTL run on PC at the first time, it will create a file ‘NETCTL.TXT’.
- Page 14 MX0808-310 Operating Instructions Picture 4 ® １４ GRANDBEING...
- Page 15 MX0808-310 Operating Instructions The right area is for device controlling. Click these buttons to control the device. It is the same as using the remote controller. The left area shows which input ports are being chosen by the output ports.
- Page 16 IP address failed. This assigned IP address is not save in flash. 11 IR call back from remote locations to control the HDMI Matrix MX0808-310 . You can use the MX0808-310’s remote through the IR RX of the UTP receiver to change the input channel for the UTP out of the MX0808-310, just changing this UTP output.
- Page 17 MX0808-310 Operating Instructions Instruction of TX IR. The sequence of "TX IR1，TX IR2，TX IR3，TX IR4，TX IR5，TX IR6，TX IR7， TX IR8" one-to-one correspond with "HDMI INPUT1，HDMI INPUT2，HDMI INPUT3，HDMI INPUT4, HDMI INPUT5，HDMI INPUT6，HDMI INPUT7，HDMI INPUT8". When an output chooses certain input, the call-back IR signal of RJ45 on this output port will choose the corresponding "TX IR"...
- Page 18 OUTPUT_N), and input port where the EDID will be copied to(Assumed as INPUT_N). Control the matrix to connect them. 2, Under MX0808-310’s normal working condition, push ‘ENTER’ and ‘OUTPUT_N’ simultaneously, within two seconds will see the LEDs lit the character ‘-‘ circularly(Means the EDID COPY is auto running). Just release the buttons, waiting for the matrix to finish the operation.
- Page 19 MX0808-310 Operating Instructions For example： Copy the EDID from the display connected to OUTPUT1 to INPUT8. 1、 Connect the display to OUTPUT1 of MX0808-310. Power on MX0808-310 and the display. 2、 Switch the matrix to connect OUTPUT1 to INPUT8. 3、...
- Page 20 Press “ENTER” button for 4 seconds,then the LED will show the working status one by one. Like this: switch mode---Debug mode---IR status---DIP setting status. Then push the ‘ENTER’ button or wait for 3 seconds, MX0808-310 goes back to normal working condition.
-
Page 21: Specification
480i Audio Format Supported DTS-HD、Dolby tureHD、7.1ch Output Video HDMI1.2 and HDMI 1.3 Maximum Transmission Distance <15m (If needed, HDMI extender is optional) <40m(use Grandbeing UTP receiver, if need UTP cable Transmission Distance longer distance,Grandbeing repeater should be used) Power Consumption 35wtts (Max) 440mmL×280mmW×140mmH... -
Page 22: Typical Application
MX0808-310 Operating Instructions TYPICAL APPLICATION MAINTENANCE Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. PRODUCT SERVICE 1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged;... -
Page 23: Warranty
MX0808-310 Operating Instructions WARRANTY If your product does not work properly because of a defect in materials or workmanship, Grandbeing Company (referred to as “the warrantor”) will, for the length of the period indicated as below, （Parts (1) Year， Labor(90) Days）... - Page 24 MX0808-310 Operating Instructions and from the servicer, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) 3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Need help?
Do you have a question about the MX0808-310 and is the answer not in the manual?
Questions and answers