General Characteristics - Televes omni-nova Instruction Manual

Omni-directional antenna for reception of tv signals
Table of Contents

Advertisement

Available languages

Available languages

User manual

General characteristics

• Omni-directional antenna for reception of TV signals on land or sea. Stable picture regardless of the heading, pitch and roll of boats, ideal
for caravans, coaches and any vehicle.
• 3 Amplifiers, one for each band (FM, BI/BIII, UHF) to avoid interference due to cross modulation.
• Incorporates an AM antenna.
• Switchable amplification.
• Rejection filters for telecommunication bands.
• Diplexed radio and TV outputs.
• Watertight.
• High quality manufacturing materials for long life.
• Complete kit, includes the following:
- AC/DC adaptor.
- Car lighter adapter.
- IEC shieIded connector.
Siting
When mounted in vehicles choose a location as far as possible from electrical cables, motors, lightning systems and electronic instruments (fig. 1).
When mounted in boats, try to install it as high as possible at the top of the boat and as far from other antennas and metallic structures as possible.
Positioning
This is an omni-directional antenna and therefore it is not necessary to direct it.
Nevertheless we recommend to direct the antenna in the same direction of the movement of the vehicle to obtain minimum wind resistance (fig. 2).
P.S.U. siting
Install the power supply unit in a place protected against heat, hummidity ... etc, and ensure the minimum cable length between the antenna and
the PSU.
Only use the required length of coaxial cable (fig. 3).
Avoid kinks or bends less than the minimum radius quoted by the manufactures of the cable used.
- "F" connector.
- Power supply unit with built-in remote amplification control.
- 1.5 m male to female PSU-TV set connection lead.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omni-nova 1444

Table of Contents