Operating Instructions - Scheppach TIGER2000S Assembly And Operating Instructions Manual

When unpacking, check to make sure all the parts shown on the Parts List on page 17
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
For additional information regarding the parts listed in the
following pages, refer to the Assembly Diagram on page 16.
1. CAUTION! Always make sure the Wet Grinder is disconnected from its
electrical outlet prior to assembling the tool, changing accessories, or performing
service to the product.
2. Wear AS/NZS approved safety impact eye glasses under a full face
shield when assembling and operating the Wet Grinder.
3. Make sure the workbench you intend to position the Wet Grinder upon is flat,
level, and sturdy enough to bear the weight of the Grinder, any additional tools
and accessories, and workpieces.
4. The Tool Support (23) may be attached to the Wet Grinder for vertical grinding/
honing or horizontal grinding/honing, depending on the application.
5. To attach the Tool Support for vertical grinding/honing, insert the Tool Support
SYMBOLOGY
UNPACKING

OPERATING INSTRUCTIONS

NOTE:
PAGE 8