Page 2
Manual Thank you for purchasing the American Weigh miniONYX digital pocket scale. Please read all operating instructions carefully before use. Scales are precision measuring devices and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind: •...
Page 3
I. Part List 1. Scale 2. Cover/Expansion Tray 3. CR2032 Lithium Battery (x1) II. Key Description MODE ON/T Mode Key ON/OFF/Tare Lock Switch MODE ON/T III. Battery Installation 1. Before using the scale for the first time, check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping/storage.
Page 4
Manual IV. Locking & Unlocking the Scale The scale’s touch sensitive keys can be locked and unlocked using the three-way lock switch on the left side of the scale. The third setting labeled “CAL” is explained in section VIII.
Page 5
of an empty container or vessel for net weight determination. NOTE: The weight of the container will subtract from the available capacity. 1. Place the empty container or vessel on the weighing platform. 2. Touch the ON/T key once. The display will then reset to zero.
Page 6
Manual switch on the side of the scale to the CAL position. The scale will turn ON and go to zero. 2. Hold the MODE key until the display shows “CAL”, then release. 3. Tap the MODE key again. The display will flash “CAL” followed by “500.0g”.
Page 7
XII. Specifications OXM-600 (miniONYX) Max. Capacity 600g Readability 0.1g Min. Weight 0.2g Power 1 x CR2032 Lithium Dimensions 2.4 x 4.5 x 0.4 in. Platform Dimensions 2.4 x 4.5 in. Warranty 10 Year Limited Warranty XIII. Capacity/Readability Charts OXM-600 (miniONYX) 600g x 0.1g...
Need help?
Do you have a question about the miniONYX and is the answer not in the manual?
Questions and answers