Summary of Contents for American Weigh Scales Mouse Scale MSC-500
Page 1
American Weigh Scales, Inc. Mouse Scale D i g i t a l P o c k e t S c a l e MSC-100 (100x0.01g) User Manual MSC-500 (500x0.1g)
Page 2
MouseScale Manual Thank you for purchasing the American Weigh MouseScale digital scale. Please read all operating instructions carefully before use. Scales are precision instruments and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind: •...
Page 3
I. MOUSE OPERATION This device is plug-and-play, designed to work without the need for installing drivers. 1. Plug the small end of the included USB cable into the Mouse Scale. 2. Insert the large end of the USB cable into an open USB port on your computer.
Page 4
This scale has come pre-calibrated at the factory. Only re-calibrate if you are experiencing trouble weighing. MSC-100 uses a 100g calibration weight MSC-500 uses a 500g calibration weight A. MSC-100 Calibration: 1. Turn the scale OFF. 2. While holding the [ M ] key, tap the [ ] key to turn the scale on then release both keys.
Page 5
weight and press [ ] to turn the scale off. Calibration is complete! V. TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries, incorrect calibration, overload or operating on an unstable surface. Please keep this in mind and maintain and operate your scale properly. This scale is a precise instrument and must be handled with the utmost care and caution.
Need help?
Do you have a question about the Mouse Scale MSC-500 and is the answer not in the manual?
Questions and answers