Related Manuals for American Weigh Scales PS-25
Summary of Contents for American Weigh Scales PS-25
- Page 1 American Weigh Scales PS-25 User Manual PS-25 (55lb x 0.01lb) Copyright © 2010 American Weigh Scales, Inc. All rights reserved. Rev. 1.0...
- Page 2 PS-25 Introduction Thank you for purchasing the American Weigh PS-25 digital postal scale. Please read all operating instructions carefully before use. Scales are precision measuring devices and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind: •...
-
Page 3: Battery Installation
I. Part List 1. Scale TARE 55lb x 0.01lb 25kg x 2g 2. Platform 3. AC-Adapter 4. AA Batteries (x2) II. Key Description 55lb x 0.01lb TARE MODE ON/OFF HOLD 25kg x 2g AWS-POSTAL ON/OFF HOLD Key TARE MODE III. Battery Installation 1. - Page 4 2. If the scale is turned off then back on, it will default to the last unit used. • PS-25 Units: lb (pound), kg (kilogram), kg:g (kilogram:gram), lb:oz (pound:ounce) VI. Using the Tare Feature You can use this scale’s tare feature to subtract the weight of an empty container or vessel for net weight determination.
- Page 5 Model Acceptable Calibration Recommended Tolerance (±) Weight Accuracy Class PS-25 10kg OIML M2 VIII. Adjustment 1. Press and hold the MODE key until the display shows “CAL”. 2. Press the MODE key again. The display will flash “CAL” followed by the calibration weight value (see chart). 3. Place the required calibration weight on the center of the platform.
- Page 6 PS-25 X. Error Codes 1. OUTZ - Zero range has shifted. Perform calibration adjustment. If the problem persists, the load cell may be permanently damaged due to overloading. 2. O-LD - Maximum capacity exceeded. Remove the extra weight to avoid damaging the load cell.