Supermicro X8DTU User Manual page 30

X8DTU/-F
To Remove:
Use your thumbs to
gently push the re-
lease tabs near both
ends of the module.
This should release it
from the slot.
Installing and Removing DIMMs
Notch
Release
Tab
To Install: Insert module vertically and press down until it
snaps into place. Pay attention to the alignment notch at
the bottom.
Release Tab
2-9
Chapter 2: Installation
DIMM DDR3
Note: Notch
should align
with the
receptive point
on the slot
3
Notch
Release
Tab
Release Tab