Supermicro X8DTU User Manual page 13

X8DTU/X8DTU-F User's Manual
X8DTU/X8DTU-F Quick Reference
Fan8
(CPU2 Fan)
P2-DIMM2B
PHY
LAN CTRL
JPL1
SXB2: PCI-E 2.0 x 8
J1
UIOP
J10
Notes:
1. Jumpers not indicated are for test purposes only.
2. See Chapter 2 for detailed information on jumpers and connectors
3. " " indicates the location of Pin 1.
4. When LE1 LED is on, the onboard power connection is on. Make sure to
unplug the power cables before removing or installing components.
5. IPMI (Intelligent Platform Management Interface) 2.0 is supported by the
X8DTU-F. For more information on IPMI confi guration, refer to the Embedded
BMC IPMI User Guide @http://www.supermicro.com/support/manuals/.
Warnings: 1. To prevent damage to the power supply or motherboard,
please use a power supply that contains a 20-pin and two 8-pin power
connectors. Be sure to connect these connectors to the 20-pin (JPW1)
and the two 8-pin (JPW2,JPW3) power connectors on the motherboard.
Failure in doing so will void the manufacturer warranty on your power sup-
ply and motherboard. 2. To provide adequate power to the add-on cards
installed on the motherboard, please connect the UIOP PWR connector
to the power supply for these cards to work properly.
P2-DIMM3A
P2-DIMM3B
P2-DIMM2A
P2-DIMM1A
P2-DIMM1B
CPU2
J2 SXB1: PCI-E 2.0 x 16
JPB
COM2
1-4
CPU1
X8DTU/-F
P1-DIMM1B
P1-DIMM1A
P1-DIMM2B
P1-DIMM2A
P1-DIMM3B
P1-DIMM3A
J3 SXB3: PCI-E 2.0 x 8 in x 4 Slot
Intel I5520
North Bridge
T-SGPIO2
JPRST1
JWD
Intel ICH10R
JPG1
South Bridge
BMC CTRL
BIOS
JBT1
(ME Rec.)
Fan6
JI2C1
USB4/5
IPMB
USB6
USB7
JI2C2
JPI2C
Fan1
Fan2
Battery
JBAT1
Buzzer
SP1
Fan3
Fan4
LE1
ME Mode JOH1
JP3 JF1
J17
JTAG Of CPLD
CPLD
USB2/3 JLPC1
Fan5
J12