Related Manuals for BOSER Technology BPF-3219
Summary of Contents for BOSER Technology BPF-3219
- Page 1 BPF-3219 Ultra Slim, 19” Fanless Panel PC, Heavy Duty Touch Screen, 12V DC Adapter...
- Page 2 Copyright Disclaimers The accuracy of contents in this manual has passed through checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for manufacturer will any infringements of patents or other rights resulting from its use. The...
-
Page 3: Table Of Contents
Table of Contents Chapter 1 General Descripton ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Dimensions ................4 Chapter 2 Unpacking ..........5 2.1 Opening the Delivery Package..........5 2.2 Inspection................5 Chapter 3 Hardware Installation ......7 3.1 Open the Cover..............7 3.2 HDD/CD-ROM Installation............. - Page 4 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
-
Page 5: Safety Instructions
Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Fail to comply with any of the following safety procedures could result in serious damage. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway... - Page 6 Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPF-3219. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C).
-
Page 7: General Description
Chapter 1 General Description The BPF-3219 is the newest Industrial Fanless Panel PC, Panel PC features anti-vibration design and is the most cost-effective alternation for users. This precise streamline platform can be applied to Kiosk, DSA, transaction terminal, POS, home security system, ATM system and voting machine parking field and more. -
Page 8: Major Features
Built-in HS-2613+VIA V4 Eden 1GHz CPU, 12V DC adapter Onboard graphics, dual ethernet, audio controller 1 x 2.5” HDD space, 1 x slim CD-ROM space BPF-3219-Y provides CF, 4 x COM, 3 x USB2.0, TV-Out Option for Wireless LAN module Specifications... - Page 9 Display Chipset VIA CX700(M) TV-Out Provides PAL or NTSC TV systems Audio Chipset VIA VT1708A Ethernet Chipset Dual RealTek RTL8100C 10/100 Mbps LAN Provides Wireless LAN module (option) Drive Bay 1 x 2.5” HDD space 1 x Slim CD-ROM space Storage 1 x Type II CF socket Watchdog Timer...
-
Page 10: Dimensions
Mechanical & Environmental Dimensions (LxHxW) 48.0 x 38.0 x 6.1 cm Cut Out Size (LxH) 43.4 x 34.9 cm Operation Temperature 0~+45 degrees C Storage Temperature -20~+70 degrees C FCC/CE Front Panel Protection IP65 compliance Power Supply 12V DC in 60W adapter or +10~+30V DC power in Dimensions... -
Page 11: Chapter 2 Unpacking
Chapter 2 Unpacking Opening the Delivery Package The BPF-3219 is packed with an anti-static bag. The board contains sensitive electrical components that are easily damaged by static (electricity). Do not remove the anti-static wrapping until proper grounding have been taken. Safety instruction has been described the anti-static precautions and procedures in the previous. - Page 12 This page intentionally left blank.
-
Page 13: Chapter 3 Hardware Installation
Chapter 3 Hardware Installation This chapter illustrates how to install components into the Panel PC system. External interface please refers to system board’s manual. Open the Cover 1. Remove screws from the back cover accordingly. -
Page 14: Hdd/Cd-Rom Installation
HDD/CD-ROM Installation 1. Unscrew the 4 screws with blue vibration pad first (figrue3.2.1), then remove the holding bracket from chassis (figure3.2.2). Figure 3.2.1 Figure 3.2.2... - Page 15 2. Attach and screw the holding bracket w/HDD (figure3.2.3), then install HDD back to chassis (figure3.2.4) Figure 3.2.3 Figure 3.2.4 3. Remove the CD-ROM drive holding bracket from chassis first (figure3.2.5). Figure 3.2.5...
- Page 16 4. Attach and screw the holding bracket in the side of the CD-ROM, then screw the other side of the drive bay back to chassis (figure 3.2.6 & 3.2.7). Figure 3.2.6 Figure 3.2.7...
-
Page 17: Sbc Installation
SBC Installation NOTE: Please check system board user manual for connector installation. 1. Install the SBC with chassis. 2. Use 2 screws install SBC in the front panel next to VGA port. -
Page 18: Wlan Module Installation
WLAN Module Installation 1. Option 1: User can install USB type wireless LAN module. 2. Option 2: User can install the Network Card and Network antenna module. -
Page 19: Wallmount Installation
Wallmount Installation There are four wallmount accessories come with package. Please use it as showing below. - Page 20 This page intentionally left blank.
-
Page 21: Touch Screen Driver Installation
Chapter 4 Touch Screen Driver Installation This chapter illustrates the detailed information for touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WIN2000 operating systems. - Page 22 The next screen is “Choose Install Location”, select “Browse” to choose where to install and click on “Install” to begin installation. Once the Install Shield Wizard finishes updating your system, click on Finish to exit the wizard. We recommend you to reboot your computer to enable the functions.
-
Page 23: Touch Screen Calibrate
4.1.2 Touch Screen Calibrate To adjust the display with touch screen, right click on “PM” in the system tray of WINXP and choose “Control Panel” to execute calibrate. Choose PenMount 6000USB device and click on “Configure” that will display next screen to start calibrate. - Page 24 Click on “Standard Calibration” button and follow the five calibrate points to do the calibration.
Need help?
Do you have a question about the BPF-3219 and is the answer not in the manual?
Questions and answers