1. Manuals
  2. Brands
  3. BOSER Technology Manuals
  4. Touch Panel
  5. BPF-3319-Z
  6. Instructions manual

BOSER Technology BPF-3319-Z Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BPF-3319-Z
19" Fanless Panel PC
with Touch Screen, Atom™ N270,
2W Stereo Speaker, CCD Camera,
6 COM, 6 USB, 12V DC Adapter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BPF-3319-Z and is the answer not in the manual?

Questions and answers

Related Manuals for BOSER Technology BPF-3319-Z

Summary of Contents for BOSER Technology BPF-3319-Z

  • Page 1 BPF-3319-Z 19” Fanless Panel PC with Touch Screen, Atom™ N270, 2W Stereo Speaker, CCD Camera, 6 COM, 6 USB, 12V DC Adapter...
  • Page 2 Copyright Disclaimers The accuracy of contents in this manual has passed through check and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for manufacturer will any infringements of patents or other rights resulting from its use. The...

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Dimensions ................4 Chapter 2 Unpacking ..........5 Chapter 3 Chassis Installation ........7 3.1 SBC Installation ..............7 3.2 HDD/CD-ROM Installation ............. 9 3.3 WLAN Device Installation ...........
  • Page 4 Chapter 5 Award BIOS Setup ......... 35 5.1 Starting Setup ..............35 5.2 Using Setup ................. 36 5.3 Main Menu ................37 5.4 Standard CMOS Features ........... 38 5.5 Advanced BIOS Features ........... 39 5.6 Advanced Chipset Features ..........40 5.7 Integrated Peripherals ............
  • Page 5 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
  • Page 6 Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious damage. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway...
  • Page 7 Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPF-3319-Z. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C).

  • Page 9: Chapter 1 General Description

    Chapter 1 General Description The BPF-3319-Z is an Industrial Panel PC features anti-vibration design and is a best cost-effective alternation for users. This precise streamline platform can be applied to Kiosk, DSA, transaction terminal, POS, home security system, ATM system and voting machine parking field and more.

  • Page 10: Major Features

    Major Features The BPF-3319-Z comes with the following features: Fanless, aluminum front panel design 19” TFT color panel display w/touch screen Intel® Atom™ N270 processor VGA, Gigabit Ethernet, Audio port 2W Stereo Speaker CCD Camera 2 x 2.5” SATA HDD space, 1 x slim CD-ROM space 1 x CF, 1 x mini PCI socket 6 x COM port, 6 x USB2.0 port...
  • Page 11 Audio Interface Audio jack for MIC In, Line Out 2W Amplifier with Stereo Speaker Ethernet Interface 1 x RJ-45 for Gigabit Ethernet 1 x mini PCI wireless LAN module (option) Storage 2 x 2.5” SATA HDD space 1 x slim CD-ROM space 1 x Type II CF socket Expansion Interface 1 x Type III mini PCI socket...

  • Page 12: Dimensions

    Dimensions Dimension measure in cm...

  • Page 13: Chapter 2 Unpacking

    Panel PC for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. The BPF-3319-Z delivery package contains the following items: BPF-3319-Z x 1, w/Power Cable Utility CD Disk x 1, including User’s Manual...
  • Page 14 This page intentionally left blank.

  • Page 15: Chapter 3 Chassis Installation

    Chapter 3 Chassis Installation This chapter illustrates how to install components into the Panel PC system. Please refers to system board’s manual for the external interface. SBC Installation Install the SBC on the chassis.
  • Page 16 Screw the SBC with the front panel.

  • Page 17: Hdd/Cd-Rom Installation

    HDD/CD-ROM Installation Screw the HDD bracket on the hard disk. Install the hard disk on the main board. Screw the other HDD bracket on the hard disk.
  • Page 18 Install the hard disk on the chassis.
  • Page 19 Install the optial device on the chassis...

  • Page 20: Wlan Device Installation

    WLAN Device Installation User can install the Network antenna module as below.

  • Page 21: Back Cover Installation

    Back Cover Installation Follow the photo instructions to install the back cover onto the chassis.

  • Page 22: Wall Mount Kit

    Wall Mount Kit Follow the photo instructions to install the wall mount kits onto the chassis.

  • Page 23: Chapter 4 Sbc Installation

    Chapter 4 SBC Installation This chapter provides the information on how to install the hardware using the HS-8601. This chapter also contains information related to jumper settings of switch, and watchdog timer selection etc. Before Installation After confirming your package contents, you are now ready to install your hardware.

  • Page 24: Board Layout

    Board Layout Jumper List Jumper Default Setting Setting Page CF Use Master/Slave Select: Slave Open COM 1 Voltage Output Select: RI Short 1-2 COM 2 Voltage Output Select: RI Short 1-2 Panel Voltage Select: +3.3V Short 1-2 Touch Screen Wire Select: 5-Wires Open Clear CMOS: Normal Operation Open...

  • Page 25: Connector List

    Connector List Connector Definition Page External Reset Button AMP R-Output Port Inverter Power Connector CompactFlash Connector Back-Light VR MIC In/Line Out Connector Serial ATA HDD Plug Connector 8-bit GPIO AMP L-Output Port CN13 SO-DDRII Socket CN14 RS-422/485 Connector CN18/CN10 COM 1/COM 2 Connector (DB9) CN19/CN16 LVDS Panel Connector CN20/CN17/CN15/CN11...

  • Page 26: System Memory

    System Memory The HS-8601 provides one 200-pin SO-DIMM socket at locations CN13. It supports DDR2 up to 2GB SDRAM. VGA Controller The HS-8601 provides CN31 is a 15-pin CRT connector, and CN29 offers an internal 10-pin CRT connector. CN19/CN16 are the LVDS interface connectors onboard reserved for flat panel installation.
  • Page 27 CN3: Inverter Power In Connector Description +12V BK_EN The HS-8601 has an onboard jumper that selects the working voltage of the flat panel connected to the system. Jumper JP4 offers two voltage settings for the user. JP4: Panel Voltage Select Options Settings +3.3V (default)

  • Page 28: Serial Ata Connector

    JP5: Touch Screen Wire Select Options Settings 5-Wires (default) Open 4/8-Wires Short CN5: Back-Light VR Description Serial ATA Connector You can connect the Serial ATA device that provides you high speeds transfer rates (150MB/sec.). If you wish to use RAID function, please note that these two serial ATA connectors just support RAID0 and only compatible with WIN XP.

  • Page 29: Serial Port Connectors

    CN7: Serial ATA HDD Plug Connector Description Description SATA_TXP0 SATA_TXN0 SATA_RXN0 SATA_RXP0 +12V +12V +12V Serial Port Connectors The HS-8601 offers NS16C550 compatible UARTs with Send/ Receive 16-byte FIFO serial ports. CN18/CN10: COM 1/COM 2 Connector (DB9) PIN Description PIN Description JP2/JP3: COM 1/COM 2 Voltage Output Select Options Settings...
  • Page 30 CN20/CN17/CN15/CN11: COM 2~COM 6 Connector (5x2 Header) PIN Description PIN Description CN14: RS-422/485 Connector (3x2 Header, COM 4) PIN Description PIN Description NOTE: The terminal resistance of RX & TX is set at 180 Ω CN12: COM 4 use RS-232 or RS-422/485 Select Options Settings RS-232 (default)

  • Page 31: Ethernet Connector

    4.10 Ethernet Connector The HS-8601 provides one RJ-45 connector for 10/100/1000 Based LAN. Please refer to the following for its pin information. When installs OS, this driver namely can automatically install. User does not need to renewal. CN34: RJ-45 Connector PIN Description PIN Description MDI0+ MDI0-...

  • Page 32: Cmos Data Clear

    4.12 CMOS Data Clear The HS-8601 has a Clear CMOS jumper on JP7. JP7: Clear CMOS Options Settings Normal Operation (default) Open Clear CMOS Short IMPORTANT: Before you turn on the power of your system, please set JP7 to open for normal operation. 4.13 Power and Fan Connectors HS-8601 provides one 5-pin power connector at CN35.

  • Page 33: Keyboard/Mouse Connectors

    4.14 Keyboard/Mouse Connectors The CN22 is a PS/2 6-pin Mini DIN connector for HS-8601. CN22: PS/2 6-pin Mini DIN Keyboard/Mouse Connector Description Keyboard Data Mouse Data Keyboard Clock Mouse Clock...

  • Page 34: System Front Panel Control

    4.15 System Front Panel Control The HS-8601 has front panel control at location CN23 that indicates the power-on status. CN1: External Reset Button Description Reset Switch CN23: System Front Panel Control PIN Description Description HDD LED+ Speaker- HDD LED- PWR Button+ PWR Button- Speaker+ Reset Switch+...

  • Page 35: Watchdog Timer

    4.16 Watchdog Timer Once the Enable cycle is active a Refresh cycle is requested before the time-out period. This restarts counting of the WDT period. When the time counting goes over the period preset of WDT, it will assume that the program operation is abnormal.
  • Page 36 -------------------------------------- Configure time mode -------------------------------------- MOV DX,2EH MOV AL,F5H OUT DX,AL MOV DX,2FH MOV AL,00H ; Setup second mode, 08H for minute mode OUT DX,AL --------------------------------------- Configure reset time interval --------------------------------------- MOV DX,2EH MOV AL,F6H OUT DX,AL MOV DX,2FH MOV AL,05H ; Setup reset time 5, User can setup from 1~255 OUT DX,AL 2.

  • Page 37: Audio Connectors

    4.17 Audio Connectors The HS-8601 has an onboard RealTek ALC202A audio connector. The following tables list the pin assignments of the Line In/Audio Out connector. CN6: MIC In/Line Out Connector PIN Description PIN Description AOUTR MIC_L AOUTL MIC_R CN2/CN9: AMP R/L Output Connector Description +SPK_RO/+SPK_LO -SPK_RO/+SPK_LO...

  • Page 38: Mini Pci Connector

    JP1: CF Use Master/Slave Select Options Setting Master Short Slave (default) Open CN4: CompactFlash Connector Description Description DATA3 DATA4 DATA5 DATA6 DATA7 SDCS1# SDA2 SDA1 SDA0 DATA0 DATA1 DATA2 470Ω pull GND DATA11 DATA12 DATA13 DATA14 DATA15 SDCS3# EWE0 RESET IORDY DACK IDE LED...

  • Page 39: 8-Bit Gpio Function

    4.20 8-bit GPIO Function The HS-8601 offers one 8-bit general purpose input/output port. CN8: 8-bit GPIO PIN Description PIN Description GPIO0 GPIO4 GPIO1 GPIO5 GPIO2 GPIO6 GPIO3 GPIO7 W83627EHG Digital I/O 1. Assembly sample code ------------------------------------ Extended function mode ------------------------------------ MOV DX,2EH MOV AL,87H OUT DX,AL...
  • Page 40 MOV AL,F3H OUT DX,AL MOV DX,2FH MOV AL,00H OUT DX,AL --------------------------------------- Configure input / output --------------------------------------- MOV DX,2EH MOV AL,FOH OUT DX,AL MOV DX,2FH MOV AL,FEH; Setup GPIO bit 0 as output, Note1 OUT DX,AL -------------------------------------------------------------------------------------- **Note 1** Example: Output Bit Instruction Bit 0 MOV AL,FE...
  • Page 41 2. DOS Debug Command: --------------------------------------- o 2e 87 o 2e 87 o 2e 07 o 2f 07 o 2e 29 o 2f 01 o 2e 30 o 2f 01 o 2e f3 o 2f 00 o 2e f0 o 2f fe...
  • Page 42 This page intentionally left blank.

  • Page 43: Chapter 5 Award Bios Setup

    Chapter 5 AWARD BIOS Setup The BPF-3319-Z uses AWARD BIOS for the system configuration. The AWARD BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options that could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.

  • Page 44: Using Setup

    Using Setup In general, you use the arrow keys to highlight items, press <Enter> to select, use the <PageUp> and <PageDown> keys to change entries, and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard. Move to previous item ↑...

  • Page 45: Main Menu

    Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to enter the sub-menu. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control...

  • Page 46: Standard Cmos Features

    Standard CMOS Features The standard CMOS is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, you must set the HDD mode to LBA mode.

  • Page 47: Advanced Bios Features

    Advanced BIOS Features This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU Feature [Press Enter] Item Help...

  • Page 48: Advanced Chipset Features

    Phoenix - AwardBIOS CMOS Setup Utility Hard Disk Boot Priority 1. Cho M. ST313032A Item Help 2. Bootable Add-in Cards ↑↓← →: Select Item +/-/PU/PD: Value F10: Save Esc: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Advanced Chipset Features This section allows you to configure the system based on the specific features of the installed chipset.
  • Page 49 Flat Panel Type Type 1 640 x 480 18-bit 1Ch Type 2 800 x 600 18-bit 1Ch Type 3 1024 x 768 24-bit 1Ch Type 4 1280 x 1024 24-bit 2Ch Phoenix - AwardBIOS CMOS Setup Utility PCI Express Root Port Func PCI Express Port 1 [Auto] Item Help...

  • Page 50: Integrated Peripherals

    Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship that is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers – a primary and a secondary –...
  • Page 51 Phoenix - AwardBIOS CMOS Setup Utility OnChip IDE Device IDE HDD Block Mode [Enabled] Item Help IDE DMA transfer access [Enabled] On-Chip Primary PCI IDE [Enabled] IDE Primary Master PIO [Auto] IDE Primary Slave PIO [Auto] IDE Primary Master UDMA [Auto] IDE Primary Slave UDMA [Auto]...

  • Page 52: Power Management Setup

    Phoenix - AwardBIOS CMOS Setup Utility USB Device Setting USB 1.0 Controller [Enabled] Item Help USB 2.0 Controller [Enabled] USB Operation Mode [High Speed] USB Keyboard Function [Enabled] USB Mouse Function [Enabled] USB Storage Function [Enabled] *** USB Mass Storage Device Boot Setting *** ↑↓←...

  • Page 53: Pnp/Pci Configurations

    PnP/PCI Configurations This section describes the configuration of the PCI bus system. Peripheral Components Interconnect (PCI), is a system that allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 54: Pc Health Status

    5.10 PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Current System Temp. Item Help Current CPU Temperature FAN1 Speed Vcore +12V 1.5V VBAT(V) ↑↓← →: Select Item +/-/PU/PD: Value F10: Save Esc: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults...

  • Page 55: Chapter 6 Driver Installation

    Chapter 6 Driver Installation This chapter illustrates the detail information of driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the drives. The following sections describe the installation procedures of the driver based on WINXP operating systems.
  • Page 56 Immediately after clicking the Chipset button in Step 1, the program launches the Setup that will assist you in the installation process. Click on the Next > button to proceed. The License Agreement dialog box then appears on the screen. Choose Yes to proceed.
  • Page 57 When the Readme File Information dialog box pops up, just click on the Next> button to proceed. Click on the Finish to completed the installation.

  • Page 58: Vga Driver Installation

    VGA Driver Installation Insert the CD that comes with the board into the CD-ROM drive. Click VGA to install video driver. The Welcome to the Setup program dialog box appears on the screen. Choose Next> to proceed.
  • Page 59 The Intel® License Agreement dialog box appears on the screen. Choose Yes to proceed. When the Readme File Information dialog box pops up, just click on the Next> button to proceed.
  • Page 60 When Setup Progress finished, just click on Next button to proceed. Please select “Yes, I want to restart my computer now” button then click “Finish” to reboot your system to take the effect once the installation is completed.

  • Page 61: Lan Driver Installation

    LAN Driver Installation Insert the CD that comes with the board into the CD-ROM drive. Click LAN to install LAN driver. When the dialog box below appears, make sure you close all other Windows applications then click on the Next> button to proceed.
  • Page 62 The Setup Status dialog box then appears on the screen. When setup is finished, please reboot your computer to take the effect.

  • Page 63: Audio Driver Installation

    Audio Driver Installation Insert the CD that comes with the board into the CD-ROM drive. Click Audio to install audio driver. When the dialog box below appears, Click on Yes to proceed.

  • Page 64: Touch Screen Driver Installation

    Please select “Yes, I want to restart my computer now” button then click “Finish” to reboot your system to take the effect once the installation is completed. Touch Screen Driver Installation 6.5.1 Installing Touch Screen Driver Insert the utility CD disk to your CD-ROM drive. The main menu will pop up as shown below...
  • Page 65 The screen displays copying “Setup Wizard” and “PenMount Utilities Installation” screen plus “welcome” message appear, click on Next>. The next screen is “Choose Install Location”, select “Browse” to choose where to install and click on “Install” to begin installation.
  • Page 66 Once the Install Shield Wizard finishes updating your system, click on Finish to exit the wizard. We recommend you to reboot your computer to enable the functions. 6.5.2 Touch Screen Calibrate To adjust the display with touch screen, right click on “PM” in the system tray of WINXP and choose “Control Panel”...
  • Page 67 Choose PenMount 6000USB device and click on “Configure” that will display next screen to start calibrate. Click on “Standard Calibration” button and follow the five calibrate points to do the calibration.

  • Page 68: Ccd Driver Installation

    CCD Driver Installation Insert the utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. The screen displays “FlyBook Camera Installer”, click on Next>.
  • Page 69 Once the Installer finishes updating your system, click on Finish to exit the wizard. We recommend you to reboot your computer to enable the functions.

  • Page 70: Wireless Lan Device Driver Installation

    Wireless LAN Device Driver Installation Insert the utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. After click on “Wireless LAN” that driver will be start to install. The screen displays driver install progress as below. Once the Install Shield Wizard finishes updating your system, click on “OK”...

Table of Contents