Table of Contents
Advertisement
Figure 7
Wall Mount Gooseneck
A wall mount gooseneck allows the
keypad to be mounted on a wall. It
may be used for door strikes or for
gates in driveways that run next to a
building wall. A gooseneck can also
be used to assist with wheelchair
access to a device. Mounting
height is generally 48" – 58" from
finished floor to the '5' button on the
touchpad for walk-up access and 45
inches from driveway level to the '5'
button on the touchpad for vehicular
access.
Keypad Adapter Plate
A keypad adapter plate is an
Figure 8
aluminum plate used to mount
keypads to stands, bollards, and
goosenecks manufactured by other companies. The installer will
measure, mark, and drill holes in the adapter plate to match with the
stand that they are using. The holes should be countersunk on the same
side as the installed screws so that the keypad will cover the mounting
screws to prevent tampering. The screws and screwholes that are
provided on the aluminum plate match up with the VP keyhole mounting
pattern.
7
Hide quick links:
Advertisement
Table of Contents
