Adjust the speaker position and make sure that the
assembly screws
-
Connect the speaker
5
speaker cable
.
●
Insert the terminal firmly.
●
Connect the terminal near the ferrite core to the display
unit.
●
Fix the cable with the clamper on the mounting bracket
.
Note
●
Fix the other side speaker in the same way.
●
There will be a gap between the display unit and the speaker.
●
Do not hold the speaker part to transport the display unit.
This TV could fall over if it's pushed, pulled or knocked down.
We therefore recommend the TV is secured to the base as illustrated.
●
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in
all cases.
Fall-prevention parts
Band
●
TKLA4301
Securing to a base
Fix pedestal and base together with band.
are securely tightened.
and the display unit with the
Preventing the TV from falling over
Clamp
●
TKLA4201
This image is for illustrative purposes only.
E b
A
Ferrite core
Hook
F
C
Terminals
Push here to
remove the hook
Screw
●
XYN4+F15FNK
Clamp
Display
Unit
Clamper
Fix the cable
Wood screw
●
THEJ019N
Screw
Band
Wood screw
11