4.2 Customising Your System (System Programming)
3.
Exiting the mode
OR
OR
Press PROGRAM
or PAUSE.
Character Entry
When storing a name or message, enter the characters as follows. The
tables on the next page show you the characters available for each key.
You can enter letters by pressing the alphanumeric keys on your
telephone.
Example: Key 2 can enter A, a, B, b, C or c.
Entering characters
•
Press the desired character key.
•
Press the matching Soft button, press the SELECT* (AUTO ANSWER) button or rotate the Jog
Dial as needed.
•
Repeat the appropriate steps for the remaining characters.
•
To erase the last letter, press the
•
To erase all letters, press the CLEAR (TRANSFER) button.
•
To alternate between capital and lower case letters, press the SHIFT button. Once this
button is pressed, the mode remains until the SHIFT button is pressed again.
* If your telephone is a KX-T7531, do not use the provided SELECT button. Use the AUTO
ANSWER button which becomes the SELECT btton when using the overlay.
154
(CONF) button.
A,a
B,b
C,c
A B C
2
Customising Your Phone & System