Panasonic KX-TD816JT User Manual page 176

5.2 Before Operating the DECT Portable Station
To install a battery
Hook the bottom of the battery on the PS,
and place the battery until it clicks.
To charge the battery
a)
Connect the charger to a power outlet using the AC adaptor.
b)
Slide the battery-attached portable station or the battery in the charger.
• Charge the battery for about 1.5 hours.
• When charging is completed, the charge indicator will change from orange to green.
Charger
• The battery is used while the PS's power is ON.
• Battery life may vary depending on usage conditions and ambient temperature.
• Please use only a Panasonic battery.
• Do not let the charged battery's electrodes touch metallic objects. The terminal may short
and overheat, causing burns.
• Clean the charge contacts on both the PS and the charger with a soft cloth once a month,
or the battery may not charge properly.
• The PS can receive calls even while charging.
• You need not worry about overcharging.
• The AC adaptor is used as the main disconnect device. Ensure that the socket-outlet is
located near the equipment for easily access.
176
To replace a battery
Set the power switch to OFF first to prevent
memory loss, and then remove the battery
while pressing the tab.
Cord holder
To power outlet
AC adaptor
(230 VAC, 50 Hz) Charge indicator
DECT Portable Station