Chapters
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clemas & Co ORBIS 200
Summary of Contents for Clemas & Co ORBIS 200
- Page 1 ORBIS SCRUBBER POLISHER RANGE OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk Web: www.clemas.co.uk...
- Page 2 ORBIS 200 & 400 SCRUBBER POLISHER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk Web: www.clemas.co.uk...
- Page 3 Fig. 1 Fig. 2 Fig. 3 Fig.4 Fig. 5...
-
Page 4: Table Of Contents
Contents Page 1 General Information ................5 Important safety advice ............. 5 Guidelines for the operator ............5 Transporting the machine ............5 Electrical connection ..............5 2 Preparing for use ................6 Fitting the handle ............... 6 Fitting the dust bag ..............6 3 Controls ..................... -
Page 5: General Information
IMPORTANT READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE 1 General Information 1.2 Guidelines for the operator • Operators must be fully trained in the use of the These floor cleaning machines are designed for the machine in accordance with these instructions, able scrubbing and polishing of hard floors and/or to perform user maintenance and the correct shampooing of carpets in indoor areas. -
Page 6: Preparing For Use
Connection point for vacuum unit lead. 2 Preparing for use Drive plate 2.1 Fitting the handle Attachment point for brush or drive disc and pad. 1. Carefully remove the machine base and handle Cable winder from their respective packaging. 2. Check that the following items are present with Used to hold supply cord in place on handle when the base and remove them from their transit machine is not in use. -
Page 7: Polishing
• Once the machine has started the interlock buttons should be released. 4.5 Fitting the solution tank • To stop the machine release both switch triggers. NOTE - The solution tank is supplied as an accessory item, complete with attachments and fitting instructions. -
Page 8: Fitting The Vacuum Unit
provided in the outer ring of the skirt, enabling free The cut-out will operate to protect the motor from movement when in use (Fig.5). overheating by switching the machine off when there is excessive friction/resistance to the cleaning head on the floor. This is usually caused by the stickiness of the pad or floor. -
Page 9: Technical Specification
9 Technical specification ∼ All models : 230-240V 50Hz, Class I construction. Enclosure to IPX4. Fitted with 15m supply cord type and 13A fused plug. 45cm Model 45cm 45cm 2/400 Pad diameter Pad pressure gm/cm² 27,5 Speed 190/380 Motor rating 1100 1100 1100... -
Page 10: Accessories
10 Accessories Item Part No. Usage Polypropylene scrubbing brush 5-3431 wet scrubbing Tynex scrubbing brush 5-3432 heavy duty wet scrubbing Shampoo brush 5-3433 carpet cleaning Bassine polishing brush 5-3434 polishing and spray cleaning Gumati polishing brush 5-3435 polishing and spray cleaning Standard drive disc (see note 1) 5-3436 retains cleaning pads... -
Page 11: Fault Diagnosis
11 Fault diagnosis The following simple checks may be performed by the operator. Trouble Reason Remedy Machine not working, neon indicator Lack of voltage/electrical supply. Check fuse *, supply cord, plug not lit. and socket outlet. Machine not working, neon indicator Switch interlock incorrectly Check operating procedure in lit. - Page 12 ORBIS COMPACT SCRUBBER POLISHER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk Web: www.clemas.co.uk...
- Page 13 Contents Page 1 Product information ..............4 1.1 Important safety advice ............... 4 1.2 Guidelines for the operator ............4 1.3 Transporting the machine ............4 2 Preparing for use ................ 5 2.1 Electrical connection ..............5 3 Controls ..................5 3.1 Fitting pads ..................
-
Page 14: Product Information
IMPORTANT READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE 1 Product information 1.2 Guidelines for the operator • Operators must be fully trained in the use These floor cleaning machines are of the machine in accordance with these designed for the scrubbing and polishing of instructions, able to perform user hard floors and/or shampooing of carpets in indoor areas. -
Page 15: Preparing For Use
6 - Solution feed lever Operates flow valve in solution tank (if 2 Preparing for use fitted). - Pull lever to release solution. - Release lever to stop flow 2.1 Electrical connection Cable winder Before connecting the machine to the power Used to hold supply cord in place on supply, check that your supply voltage handle when machine is not in use. -
Page 16: Starting The Machine
• IMPORTANT - Dispose of unused 4.1 Starting the machine cleaning solution in accordance with the • Fully unwind the supply cord from the manufacturer’s directions. handle and plug into a convenient socket 4.4 Fitting the solution tank outlet. The neon indicator on the handle should light showing that power is NOTE - The solution tank is supplied as an available. -
Page 17: After Sales Service
necessary. Blocked vents will cause the motor to overheat, and may lead to premature 8 Guarantee failure. Warranty claims for this type of damage will not be accepted Your product is guaranteed for two years • Solution tank - Check water flow, if from the date of original purchase, or hire restricted inspect hoses and tubes for purchase, against defects in materials or... -
Page 18: Technical Specification
9 Technical Specification All models : Class I construction. Enclosure to IPX4. Fitted with 15m supply cord type H05VV-F 3x1.0mm² (10A), and non rewireable plug. Model OB28240 Working width Pad diameter Pad pressure gm/cm² 24.4 Voltage a.c. 220 - 240 Frequency Motor speed 1400... -
Page 19: Fault Diagnosis
11 Fault diagnosis The following simple checks may be performed by the operator. Trouble Reason Remedy Machine not working, neon - Lack of voltage/electrical - Check fuse *, supply cord, plug indicator not lit. supply. and socket outlet. Machine not working, neon - Switch interlock incorrectly - Check operating procedure in indicator lit. - Page 20 ORBIS CORDLESS BURNISHER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk Web: www.clemas.co.uk...
- Page 28 ORBIS DUO SCRUBBER POLISHER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk Web: www.clemas.co.uk...
Need help?
Do you have a question about the ORBIS 200 and is the answer not in the manual?
Questions and answers