High Voltage Battery Cut-Off Switch - Lincoln 2015 MKZ HYBRID Owner's Manual

Hide thumbs Also See for 2015 MKZ HYBRID:

Table of Contents

3. Pull the outer cover off to expose the

service disconnect lever.

4. Slide the handle on the service

disconnect outboard to the right.

MKZ Hybrid (), enUSA

High Voltage Battery

5. Pull the handle toward you and remove

the circuit from the vehicle to disable the

high voltage battery.

6. Reverse this procedure to reinstall the

high-voltage service disconnect and the

outer lever to the service disconnect.

Reactivating the High Voltage Battery

Note: If you have manually disconnected

your high voltage shut off circuit, you need

to reconnect the circuit before you can

reactivate it. The vehicle will detect if the

electrical system is safe and reactivate

automatically.

HIGH VOLTAGE BATTERY CUT-

The high-voltage shut off operation shuts off

power from the high-voltage battery after a

collision, or if your vehicle receives a

substantial physical jolt.

To reactivate your vehicle after either event,

perform the following steps:

1. Turn the ignition off.

2. Turn the ignition on.