FLIR T420-NIST User Manual page 78

Procedure Follow this procedure to change the object parameters globally:
NOTE
Of the five parameters above, emissivity and reflected apparent temperature are the
two most important to set correctly in the camera.
SEE ALSO
For more information about parameters, and how to correctly set emissivity and re-
flected apparent temperature, see section 28 – Thermographic measurement tech-
niques on page 101.
Publ. No. T559772 Rev. a593 – ENGLISH (EN) – March 16, 2012
actoolsupply.com
1 Push the Menu/Back button.
2
On the main menu, go to the Parameters button
3 On the Parameters menu, select the parameter that you want to change
and push the joystick.
4 Move the joystick up/down to change the value.
5 Push the joystick to confirm.
actoolsupply.com
19 – Working with measurement tools and isotherms
and push the joystick.
67