Phone - Focus ST-IIIB Manual

Note: 1.The user code is the identification code in CMS setting, CMS 1 and CMS
2 use the same user code; dialing times can be set 1-15 , communication
inspection interval time can be set 0-999 hours, the common setting is
24 hours.
2. When set phone number, long press 1, display the letter P, means pause
1 second when dialing, when the telephone line which connect to the
alarm panel is sub-line, need a pause dialing.
3. For GSM, just recognize the number behind P, can make sure telephone
and GSM dial the same number.
For example: the sub-line connect to alarm panel, CMS number is 80808080,
in this way, set CMS number like this 9P80808080, 9 is out code.
Press[*] for
3
seconds
0•1
'4»)Enterpassword[+[QJITJ~@J@J[fil +~+[]]~+OJ~
... Please enter phone number,
•
~~::: ~ ~~~~fn~e~:~eseL~ng
+
~
[[][]] [QJ []J[QJ []] [QJ []] [QJ +
~
second, press confirm key to Press[ 1 ] key for 3 seconds.
save, press back key to exit.
6.3 Set voice phone
Press[*] for
3
seconds
0
+ [QJOJ[]J@J@][fil
+~+[]]~Then
operate according to
the voice prompt as below:
ij»)
[1]Set
voice phone 1
'4•
Please enter phone
number, press• key to delete,
Long press 1, dialing pause 1
second, press confirm key to
save, press back key to exit.
'4.
T.he setting
1ssaved
'4»)
Please enter dialing
times, press confirm
key lo save, press back
key to exit.
'4»)
T_he setting
1s saved
'4.
1.Enable
2.Disable
'4~
T.he settl ng
1ssaved