Table of Contents
Advertisement
14141 .. fi.ii@n•.,,
To arm the panel. The zone number will be also display on the LCD
screen. At this time arm system is not allowed unless you force arm.
2.3.2
The control pane can power 15V, 1 OOmA to detectors. The max curent
is 1 OOmA. Do not exceed 1 OOmA, otherwise please use extra power
supply.
2.4 Install wireless detector
2.4.1 As the detector's manual says,install coded detector in the area 150m
from the control panel.Please test and make sure detector can work with
control panel normally.
2.4.2 Wireless repeater function:when wireless detector is too far from the
panel or some occluders between panel and detector which disable the
panel receivethe signal from wireless detector.Now you can choose our
made wireless repeater to achieve wireless signal relay trans milting.
Advertisement
Table of Contents
