How To Enable Usb2.0 Charge (For S3/S4 Status); How To Disable Cir Controller (For Internal Ir Receiver) - Zotac ZBOX nano AD12 User Manual

ZOTAC ZBOX nano

How to enable USB2.0 charge (for S3/S4 status)

1. In Advanced menu, select Onboard Device Config and press <Enter>.
Use the arrow keys to enter the item Rear USB2.0 Charge hotplug(Top/
2.
Bottom) / Front USB2.0 Charge hotplug, and select Enabled.

How to disable CIR controller (for internal IR receiver)

1. Use the arrow keys to navigate to Advanced > OnBoard Device Config >
CIR Controller Configuration.
10