Protocol Bindings; Figure 19: Load Balancing Is Available When Multiple Wan Ports Are Configured And Protocol Bindings Have Been Defined - D-Link DSR-500 User Manual

Unified Services Router
Figure 19: Load Balancing is available when multiple WAN ports are
configured and Protocol Bindings have been defined

3.4.3 Protocol Bindings

Advanced > Routing > Protocol Bindings
Protocol bindings are required when the Load Balancing feature is in use. Choosing
from a list of configured services or any of the user-defined services, the type of
traffic can be assigned to go over only one of the available WAN ports. For
increased flexibility the source network or machines can be specified as well as the
destination network or machines. For example the VOIP traffic for a set of LAN IP
addresses can be assigned to one WAN and any VIOP traffic from the remaining IP
addresses can be assigned to the other WAN link. Protocol bindings are only
applicable when load balancing mode is enabled and more than one WAN is
configured.
36
User Manual