AIR CONDITIONING WITH INSTALLATION
For more efficient use Pinguino can also be
semi-permanently installed
30 cm
To install, proceed as follows:
• Make a hole in a outside wall or through
the glass of a window. Check the height
and dimensions given in figure D
in a window
in the
pane
wood sill of
a window
D
S e t t i n g u p
• Fit the flange
• Fix the hose
• Attach the end of the hose
30 cm
When the hose
hole with the bung on the flange
NOTE:
When the unit is installed semi-permanently,
we recommend leaving a door slightly open
(1 cm is enough) to ensure an adequate
exchange of air.
in the wall: for
optimum results,
insulate the sec-
tion of the wall
with
suitable
insulating mate-
rial.
25
supplied to the hole.
26
to the coupling on the
back of the unit (figure A).
25
ge
as shown in the figure E.
26
is not attached, close the
26
to the flan-
E
MAX 120 cm
MIN 30 cm
25
.
7