Door Phone - Eircom advantage D3 User Manual

4.2.68 Door Phone

If the system has a door phone fitted, when the door button is pressed, the system will ring the
extensions that have been assigned to ring for the door phone.
D o o r p h o n e
C a l l i n g
O p t i o n s
D o o r p h o n e
0 0 : 0 0 : 0 1
O p t i o n s
D o o r p h o n e
O p e n i n g D o o r
O p t i o n s
Note 1: It is not possible to put the call on hold.
While the door is being opened, the call can be cleared and the System Phone will return to idle.
Note 2: If the call is not answered within 30 seconds, the call is cleared and the extensions stop
ringing.
If all the extensions programmed to ring are busy, the door phone extension will receive 3 seconds
of Busy tone after which the call is cleared.
(DOOR PHONE) EXTENSION Key: If one of the programmable keys has been configured as the
EXTENSION key for the door phone extension, the door can be opened by pressing this key when
a call has been established with the door phone. The LED on the key will flash slowly to indicate
that the door is opening.
Door opening dialling code
As well as being able to open the door while on a call to the door phone (see above), any
extension user can also open the door by dialling the door opening code *78.
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
A n s w e r
O p e n
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
E n d c a l
eircom advantage executive phone D3 user guide
To answer a door phone call -
A Doorphone call will be shown on the
display of the System Phone
programmed to ring.
•
Press the <Answer> key to take
the call
An internal call is established between
the System Phone and the door phone
extension.
•
Press the <Open> key to unlock
the door
To end the call either -
•
Replace the handset or press the
ON HOOK
•
Or Press the <Options> key to go
into the menu and press <Endcall>
l
key
43