Page 1
Bergen Monterings- og bruksanvisning Installation- and user manual Installations- och bruksanvisning Kättöohje Product no: SA-BERG0-000 RRF no: 40 10 2244 Last updated: 01.01.2013...
2. Technical information regularly. It is the responsibility of the client that these regulations are complied with in the country/region 3. Distance to combustible material where the fireplace is installed. Nordpeis AS is not 4. Assembly responsible for incorrect installation. Operating control...
All safety distances are minimum distances. Installation of the stove must comply with the current rules and regulations of the country where the product is installed. Nordpeis AS is not 4. Assembly responsible for wrongly assembled stoves.
For the flue connection to the chimney, follow the IMPORTANT! Always remember to open the air recommendations from the chimney manufacturer. vent control (preferably also the door) before new wood logs are inserted into a hot burn chamber. Fresh air supply Let the flames get a good grip on the wood before FIG 8: The possibility to connect a fresh air supply the air control setting is reduced.
For this reason it is important to www.nordpeis.com increase the air supply just after adding logs. Choice of fuel All types of wood, such as birch, beech, oak, elm, ash and fruit trees, can be used as fuel in the insert.
Page 6
oak and birch has the highest density. Attention! We do not recommend using fuel briquettes/ compact wood in our products. Use of such fuel may cause the product to overheat and exceed the temperatures determined safe. Burning briquettes/ compact wood is done so at your own risk and only small amounts (max 1/3 of normal load) should be used for each load.
Page 7
Some advice in case of combustion problems Error Explanation Solution The chimney is blocked Contact a chimney sweeper / dealer for more information or clean The flue is sooty or there is accumulated soot on the the flue, smoke baffle and burn chamber. No draught smoke baffle The smoke baffle is wrongly positioned...