Union Community VIRDI 4000 User Manual page 25

VIRDI 4000 User Guide
3.3.3.1. "1. FP" user
If a user's fingerprint is already registered, changing the identification level or
additional fingerprint registration is possible.
1. 1:1 Level
2. Add FP
※ A maximum of 5 fingerprints can be added to an ID. If there is an attempt to
add more than 5 fingerprints, a "ppibig" buzzer sound will be heard when the
user presses [2].
[1] When Verification level change is selected
< 1:1 Level>
( 0-9 ) : 0
To change settings, enter the new settings.
[2] When register additional fingerprints is selected
<Add FP>
Input Your FP
You will hear a "ppiriririck" buzzer sound twice and a light on the fingerprint
sensor will turn on. Place a finger onto the fingerprint input window and wait for
2~3 sec. until the light turns off and the fingerprint is saved.
If you hear a "ppiririck" buzzer sound, registration is successful. It returns to the
"1.Add" screen. If the fingerprint image is not so good or there is no input in the
window for 10 sec. after the fingerprint sensor light turned on, it returns to the "1.
Add" screen with a failure buzzer sound "ppibig".
3.3.3.2. "2.ID&PW" user
when a user wants to change his/her password
1. Modify PW
Press the [1] button to change the passwords
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
To change the authentication level, press [1]. To
add a fingerprint to the corresponding ID, press
[2].
Recommended setting: '0'
To change passwords, press [1]. To cancel it,
press [#].
25