Receiver Unit Panel Descriptions - Pro2 HDMIIPLR HDMI Over CAT6 Extender User Manual

RECEIVER UNIT PANEL DESCRIPTIONS

1. Power LED
This LED indicator will activate once the included 5V DC power adapter
has been properly connected between the Receiver unit and an open
wall power socket.
2. Link LED
This LED indicator will activate once Cat 6. cable has been properly
connected between the Transmitter unit and Receiver unit.
3. IR Extender
Please connect one IR Extender cable to this port. Once IR emitter cable
has been connected between Transmitter and the source device, the
source device can be controlled at the Receiver end by its IR remote
controller.
4. LED Display
The LED Display is designed to identify which source channel the
receiver should display. User can select source channel via remote
control. Please refer to Appendix A for related link diagram.
5. Power Input Port
Connect 5V DC power supply to this input port.
6. RJ45 Port
Connect a 100Ohm CAT6 cable between this input port and the RJ45
output port from Transmitter unit.
7. HDMI output port
Connect the one HDMI cable between this output port and HDMI input
port of the HDTV display.
8. Reset
Please press this button once it has connecting problem.