Connecting And Operating - Pro2 HDMIIPLR HDMI Over CAT6 Extender User Manual

CONNECTING AND OPERATING

How to Connect the HDMIIPLR HDMI Over CAT6 Extender
1. Connect one HDMI Cable between the HDMI output port of source
device and the HDMI input port of Transmitter unit
2. Connect one HDMI Cable between the HDMI input port of display
device and the HDMI output port of Receiver unit.
3. Connect one 100Ohm CAT6 cable between the RJ45 port of
Transmitter unit and RJ45 port of Receiver unit.
4. Connect 5V DC power supplies to both Transmitter and Receiver unit.
5. Power on the output device first and then the source device.
6. Use remote control to select the related channel dip switch has set up
on the transmitter side. Please refer to Appendix A for the link diagram.
Note:
1. IR Function is able to receive signal from remote control of your
DVD player and remote control given along with our Receiver unit.
Please refer to following diagram:
One Source to One Display Function