Transmitter Unit Panel Descriptions - Pro2 HDMIIPLR HDMI Over CAT6 Extender User Manual

TRANSMITTER UNIT PANEL DESCRIPTIONS

1. Power LED
This LED indicator will activate once the included 5V DC power adapter
has been properly connected between the Transmitter unit and an open
wall power socket.
2. Link LED
This LED indicator will activate once Cat 6. cable has been properly
connected between the Transmitter unit and Receiver unit.
3. Dip Switch
Dip switch is designed to define the source channel. Different
combination of dip switch refers different source channel. User can
change the combination of dip switch in order to define source. There
are 16 combinations for dip switch, please refer to Appendix A.
4. Power Input Port
Connect the 5V DC power supply to this input port.
5. RJ45 Port
Connect a 100Ohm CAT6 cable between this output port and the RJ45
input port from Receiver unit
6. HDMI Input port
Connect one HDMI cable between this port and HDMI output port of
the source device (DVD, Set-top box, blue-ray DVD)
7. IR Emitter
Connect an IR Emitter Cable to this IR port and stick IR emitter module
on the IR receiver zone of HDMI source (set-top box, DVD player and
Blue ray DVD Player).
8. Reset
Please press this button once it has connecting problem.