Canon Vixia HF11 Instruction Manual page 65

1 If the joystick guide does not
appear on screen, press
@
to
display it.
2 Push the joystick (A) toward
([j.
.... JUMP 10 IMAGES
... ..... I ........... ...
I ~
3 Select (... ~ ) [~ JUMP 10
IMAGES] or
[~
JUMP 100
IMAGES].
4 Jump (...
~)
the number of images
selected and press
@.
You can press
@9
again to hide the
joystick guide.
o
IMPORTANT
• Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
mode dial.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or transferred from a
computer.
- Images whose file names have been
changed.
Slideshow
You can playa slideshow of all the still
images.
1
Select (...
~)
the first still image of
the slideshow.
2
Press
[~/1I1
to play back the still
images one after another.
[()!
Press
~
to stop the slideshow.
Index Screen
1
Move the zoom lever toward W.
The still images index screen appears.
2
Select (...
~ ,
...
~)
an image.
• Move the orange selection frame
to the image you want to view.
• Repeatedly press [......) or
(~~)
to
extend the selection frame and
browse through whole index
pages.
3
Press
@.
The index screen closes and the
selected image is displayed.
I . . .
To
SELECT WHICH STILL IMAGES TO PLAY
BACK
.
.
You can switch between the still images
recorded in the built-in memory and
those recorded on the memory card.
1 In the index screen, move (...
~ )
the
orange selection frame to the tabs
on the top of the screen.
2 Select (...
~)
the location of the still
images you want to play back.
3 Return (... ~ ) to the index screen to
select the still image.
G!!i)
Still images in the built-in memory
rS?I
Still images on the memory card
65
•