Canon Vixia HF11 Instruction Manual page 109

101
NO DISC
- Insert a disc into the DVD burner.
- This message can appear also if condensation has formed. Wait until the DVD burner dries completely before
resuming use.
NO IMAGES
- There are no still images to add to the disc.
NO SCENES
- There are no movies to add to the disc.
NO SCENES LEFT TO ADD
- You selected to create a DVD with the [REM.SCENES] setting, but all the scenes have already been added to
discs created in the past; there are no applicable scenes.
NO TRANSFER ORDERS
- You selected to create a DVD with the [TRANS.ORO] setting, but no still images have been marked with
transfer orders (QJ 90).
OPERATION CANCELED
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
UNABLE TO RECOVER DATA
- Could not recover a corrupted file.
Direct Print Related Messages
CANNOT PRINT!
- You attempted to print an image that was recorded with another camcorder, has a different compression, or
was edited on a computer.
CANNOT TRIM
- You attempted to trim an image that was recorded with another camcorder.
CHECK PRINT SETIINGS
- Current print settings cannot be used for printing with the I9J
oN'
button.
COMMUNICATION ERROR
- The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the
printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the
I9J
oN'
button, check the print settings.
Or, you attempted to print from a memory card that contains a large number of images. Reduce the number of
images.
COULD NOT PRINT X IMAGES
- You attempted to use the print order settings to print X images that were recorded with another camcorder,
with a different cempression or were edited on a computer.
FILE ERROR
- You attempted to print an image that was recorded with another camcorder, has a different compression, or
was edited on a computer.
109
•