Sonic Sensors; Basic Movement - WowWee Roboreptile User Manual

sOniC sEnsOrs

Roboreptile has Sonic Sensors located on either side of his head,
just behind the jaw. This enables him to detect sharp, loud sounds
(like a clap) to his left, right, and directly ahead.
When he hears a sound he will run towards it.
Roboreptile listens when he is not moving, not wearing his hood,
and when he isn't in Program Mode. When he is performing
a movement or animation his Sonic Sensors are turned OFF.
Front view of Roboreptile
Sonic Sensors
0

basiC MOvEMEnt

Walk
Cycle continuously through 'Forward' (Layer 1) to alter
Roboreptile's gaits.
Walk 1 - 4 legs Fast
Walk 2 - 4 legs Slow
Walk 3 - 2 legs Big step
Walk 4 - 2 legs Small step
To cycle through each walk, the Forward button must be pressed
when Roboreptile is still walking, otherwise he will start from
Walk 1.
Jump
Cycle between 2 or 4 legged jumping by pressing Forward
in Layer 3. The initial jump style depends on whether Roboreptile
is on 2 or 4 legs.
To cycle between the two styles, Roboreptile must be performing
a jump when the Forward button is pressed again.
Turning
Pressing left or right will make Roboreptile perform a turn on the
spot in that direction as you face him. Press the same direction
button again during the turn and Roboreptile will start a walking
turn.
Pressing the same button will cycle between these two turns.
Walking forward, backwards, or turning lasts for 30 seconds not
including obstacle avoidance.
NOTE
Pressing turn will interrupt a walk.