Resetting Or Excluding The Garage Door Controller; To Reset A Garage Door Controller; Deleting The Garage Door Controller - Linear ADT Pulse GD00Z-2 Installation Instructions Manual

Enrolling with the System (Cont.)

Resetting or Excluding the Garage Door Controller

If you have trouble adding the Garage Door Controller you can reset the device. Resetting
the device removes it from a site (Not the same as factory resetting the device). You can
then try to add the device again.

To reset a Garage Door Controller:

1. In the web portal, click the System tab.
2. Click Manage Devices.
◆ The Manage Devices Assistant wizard appears.
3. Click Lights, Thermostats & more.
◆ The Z-Wave Assistant wizard appears.
4. Click Reset Device.
5. Press and release the Garage Door Controller's include button once.
◆ The Z-Wave device resets.
6. Click Cancel.

Deleting the Garage Door Controller

To delete the Garage Door Controller:
1. Click the System tab, if it is not already selected.
2. Click the name of the device you want to delete. The device page displays information
about the selected device.
3. Click Delete. A pop-up window prompts you to confi rm the deletion.
4. Click Yes to complete the deletion.
✓ NOTE: If you attempt to delete a device that is referenced in an automation, alert, or
schedule, or replace the device in all automations, alerts, and schedules in which it
.
is referenced before you can delete the device. Click OK to exit without deleting the
device.
8