Reduce An Incident By Moving The Start; Reduce An Incident By Moving The Start Or End; Creating An Incident By Setting The Start And End; Set The Start Of An Incident - Videoswitch VDM-4G80 User Manual

Videoswitch
8.2.4

Reduce an Incident by Moving the Start

ALT +
8.2.5

Reduce an Incident by Moving the Start or End

NO
8.3

Creating an Incident by Setting the Start and End

An alternative method of creating an incident it to pause the replay at the start of the recorded video that you
wish backup and set that point, then pause the replay at the end of the recorded video that you wish backup
and set that point.
8.3.1

Set the start of an incident

SEARCH
EVENTS
INCIDENTS
ALT
and
8.3.2

Set the end of an incident

SEARCH
EVENTS
INCIDENTS
Vdm601r.doc
Press the ALT and
keys to move the start of an incident forward by 100 images
Press the NO key to reduce the size of the incident by 100 images. The reduction will
be at the start or end depending on whether the
Go to the start of the recording that you wish to mark as an
incident. Any of the PLAY keys may be used.
You may wish to use the SEARCH facility to get to the required
place.
You may wish to use the EVENTS list to get to the required place.
Press the PAUSE key when you are at the required place in
the recording
Enter the INCIDENTS mode
Select a spare incident (or an existing incident if you wish to move the
marker)
Press the ALT and SET START keys. The time and date of the
start of the incident will added to the list
Go to the end of the recording that you wish to mark as an incident.
Any of the PLAY keys may be used.
You may wish to use the SEARCH facility to get to the required
place.
You may wish to use the EVENTS list to get to the required place.
Press the PAUSE key when you are at the required place in
the recording
Enter the INCIDENTS mode
VDM Digital Recorder
or key was used last.
27