Videoswitch
6 Viewing Live Images
6.1
Enter Live Mode
Press the LIVE key to enter LIVE mode
6.2
Live Display Modes
6.2.1
Full Screen Main Monitor
Select full screen views of different cameras by pressing the keys Camera 1, 2, 3 etc
1..16
6.2.2
Spot Monitor
The spot monitor output is a completely independent monitor output that always displays a full screen live
image.
ALT
and
1..16
6.2.3
Picture-in-Picture
To view a Picture-in-Picture image on the main monitor, press the PIP key.
The camera select keys may then be used to select the main camera displayed in the main part
of the image. You may alternatively specify that these key select the PIP image via the SETUP
1..16
menu (SETUP/Display/PIP mode).
Press the LEFT, RIGHT, UP, DOWN keys to move the PIP image to the required part of the
screen.
To swap the main and the PIP image, press:
ALT
and
To exit the PIP mode, press the
6.2.4
Quad
Press the quad key to view four pictures at once on the screen. If there are more than four
cameras, you can press it again to see another four of the cameras.
Vdm601r.doc
Select cameras on the spot monitor by pressing the ALT key in combination with the
keys 1, 2, 3 etc
Press the ALT key in combination with the
images while in PIP mode. If both images are the same, press one of the camera
keys 1..16 to change the main image.
,
or
key.
VDM Digital Recorder
key to exchange the two displayed
19