Table of Contents
Advertisement
password
You can enable or disable the controller's password.
1. Press the password <Set> button.
2. To enable the password, set it to <on>.
If not, set it to <off>.
3. Provide the current password.
4. To apply the changes, press <oK>; To cancel your
setting, press <exit>.
To change the password
You can change the password.
1. Press the password <Set> button.
2. Provide the current password.
3. Provide a new password.
4. To apply the changes, press <oK>; To cancel your setting, press <exit>.
The default password is "4321".
`
M
The default password can be exposed to a hacking thread so it is recommended to change the password after
`
J
installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
English _39
Hide quick links:
Advertisement
Table of Contents
