Table of Contents
Advertisement
installation
preCAuTionS
Before you install the product, read through and comply with the following instructions.
• The product is designed for indoor use only.
• Keep it away from water or moisture.
• Do not put excessive force on it.
• Do not pull out the power cable forcibly.
• Do not dismantle it at your own.
• Use only the rated I/O range.
• Use only the provided power cable.
• Use the power plug containing the earth wire if available.
• Install the system controller on a flat table.
• The layout of the main unit and the wiring system are critical for a proper system operation.
• If the devices are too close with each other or in a poor-ventilating environment, the system may not work
properly.
Inaccessibility to the system makes the repair difficult or even impossible.
• To prevent a system failure or to reduce the system shutdown, make enough room for ventilation and
close the cover firmly.
• Do not dismantle the system controller at will as a high voltage runs inside the system controller.
- Operation Temperature : 0°C ~ 40°C
- Storage Temperature : -20°C ~ 60°C
- Operation Humidity : 10%~70% RH
- Storage Humidity : 10% ~ 90% RH
- Power Consumption : DC 12V, Max 4W (
14_ installation
)
Hide quick links:
Advertisement
Table of Contents
