connecting to an external device
Connecting the pTZ Camera
By connecting RS-485 port on the rear of the PTZ camera with PORT 1 of SPC-6000, you can
control the camera.
Depending on the camera, the polarity may differ.
`
M
For more information, refer to the user manual of the PTZ camera.
for the half duplex system
- Connect RX (+) of RS-485 port of the PTZ camera with
TX (+) of PORT 1 of SPC-6000.
- Connect RX (–) of RS-485 port of the PTZ camera with
TX (–) of PORT 1 of SPC-6000
for the full duplex system
- Connect RX (+) of RS-485 port of the PTZ camera with
TX (+) of PORT 1 of SPC-6000.
- Connect RX (–) of RS-485 port of the PTZ camera with
TX (–) of PORT 1 of SPC-6000.
- Connect TX (+) of RS-485 port of the PTZ camera with
RX (+) of PORT 1 of SPC-6000.
- Connect TX (–) of RS-485 port of the PTZ camera with
RX (–) of PORT 1 of SPC-6000.
20_ connecting to an external device