Before Wiring Steam Humifier; Using The Dip Switches; Step One: Remove The Steam Humidifier Cover; Step Two: Understand The Dip Switches - Honeywell Steam Humidifier Professional Installation Manual

Before Wiring Steam Humidifier
Before wiring the steam humidifier:
I will read the section "Understand the DIP Switches" beginning on this page
I will read the section "Deciding on the Wiring Configuration" beginning on page 29

Using the DIP Switches

The wiring features are configured by DIP settings, which are described under the steam humidifier cover.
STEP ONE: Remove the Steam Humidifier Cover
CAUTION: Voltage Hazard.
Be sure steam humidifier is not plugged in when removing the cover.
STEP TWO: Understand the DIP Switches
1 2 3
On
Off
Steam Humidifier System 69-2285—09
1
2
On
3
Off
MCR29608
4 5 6
M29609
Loosen the cover screw.
Slide cover out from front.
With the cover removed, you will see six DIP switches
to the left of the user interface panel. This manual
refers to DIPs 1–6 from left to right.
DIPS 1 and 2 are used for maintenance.
DIP 1 and DIP 2: Together, these two DIPs specify
how often the automatic flush cycle is performed. See
"Routine Maintainence" on page 44.
27