Before Wiring Truesteam; Using The Dip Switches; Step One: Remove The Truesteam Cover; Step Two: Understand The Dip Switches - Honeywell HCM-631N - Quietcare 3 Gallon Owner's Manual

Before Wiring TrueSTEAM

Before wiring the TrueSTEAM:
I will read the section "Understand the DIP Switches" beginning on this page
I will read the section "Deciding on the Wiring Configuration" beginning on page 28

Using the DIP Switches

The wiring features are configured by DIP settings, which are described under the TrueSTEAM cover.
STEP ONE: Remove the TrueSTEAM Cover
CAUTION: Voltage Hazard.
Be sure TrueSTEAM is not plugged in when removing the cover.
M29608
STEP TWO: Understand the DIP Switches
1
On
Off
26
1
2
1 2 3 4 5 6
On 3
Off
2 3 4 5 6
Loosen the cover screw.
Slide cover out from front.
With the cover removed, you will see six DIP switches
to the left of the user interface panel. This manual
refers to DIPs 1–6 from left to right.
DIPS 1 and 2 are used for maintenance.
DIP 1 and DIP 2: Together, these two DIPs specify
how often the automatic flush cycle is performed. See
"Routine Maintainence" on page 46.
M29609
TrueSTEAM Humidification System 69-2285—01