File Menu - Sony PXW-X180 Operating Manual

File menu

File
Menu items Sub items and setting values Contents
All File Load SD Card
Settings for the All
file
Save SD card
File ID
Scene File
Recall Internal Memory
Settings for the
Scene file
Store Internal Memory
Load SD Card
Save SD card
File ID
Scene White Data
Planning Load Media(A) or Load Media(B)
Metadata
Settings for
operation of
planning metadata
Properties
Clear Memory
Clip Name Disp
82 Setup Menu List
Execute / Cancel
Execute / Cancel
Execute / Cancel
Execute / Cancel
Execute / Cancel
Execute / Cancel
On / Off
Execute / Cancel
Execute / Cancel
Execute / Cancel
Title1(ASCII) / Title2(UTF-8)
Loads the All file.
Execute: Executes this function.
Stores the All file.
Execute: Executes this function.
Names the file.
Loads the Scene file from the internal memory.
Execute: Executes this function.
Stores the Scene file to the internal memory.
Execute: Executes this function.
Recalls from an SD card by selecting "Execute."
Stores to an SD card by selecting "Execute." The setup file is
stored to the following directories.
For PXW-X180: /Private/Sony/PRO/CAMERA/PXW-X180/
For PXW-X160: /Private/Sony/PRO/CAMERA/PXW-X160/
Names the file.
Sets whether to apply the White Balance data when recalling
the Scene File.
To load planning metadata from the SxS memory card in slot
A or B.
Selecting "Execute" displays the list of the planning metadata
files stored on the SxS memory card in slot A or B. Specify a
file, select "Load" then "Execute" for loading.
Notes
• The file list displays up to 64 files. Even if the total number
of planning metadata files is 64 or less, all of the planning
metadata files may not appear if the directory where they
are located in the SxS memory card (XDROOT/General/
Sony/Planning) contains 512 or more files.
• After you start loading, do not remove the SxS memory
card until the completion message is displayed.
Select "Execute" to display the detailed information of the
planning metadata loaded in the camcorder.
File Name: File name
Assign ID: Assignment ID
Created: Time and date of creation
Modified: Time and date of most recent modification
Modified by: Name of person who modified the file
Title1: Title1 specified in file (clip name in ASCII-format)
Title2: Title2 specified in file (clip name in UTF-8-format)
Material Group: Number of material groups (groups of clips
recorded using the same planning metadata)
Shot Mark0 to 9: Name defined for Shot Mark 0 to 9
Select "Execute" to clear the planning metadata loaded in the
camcorder.
Selects the display mode of the clip name specified in
planning metadata.