Maintenance; Cleaning The Appliance - Mazzer GRINDER-DOSER MIN User Manual

ENGLISH

13) MAINTENANCE

It is essential to check the state of the supply cable and plug periodically.
IN THE EVENT THE SUPPLY CABLE OR PLUG ARE DAMAGED, CALL IN SKIL-
LED TECHNICAL PERSONNEL TO REPLACE THEM, THIS TO PREVENT ANY
RISK.
IN CE-CERTIFIED APPLIANCES,A SPECIAL TOOL IS REQUIRED TO OPEN THE
BASE PLATE TO GET AT THE CABLE.
It is recommended to use original spare parts only.
In order to assure the lasting efficiency of the appliance, skilled technical person-
nel must be called in to perform periodical maintenance, including detailed checks
of the state of those components subject to wear.
The state of the grinding blades must be checked periodically. Keeping the grinding
blades in an excellent state assures high-quality grinding, resulting in greater pro-
ductivity and limited overheating.
When using coffee blends of average hardness, it is advisable to replace the grin-
ding blades approximately every:
400 kg for the Super Jolly model
300 kg for the Mini model
350 kg fot the Lux model.

14) CLEANING THE APPLIANCE

DISCONNECT THE APPLIANCE'S POWER SUPPLY BY UNPLUGGING IT
BEFORE CLEANING.
THE APPLIANCE MUST NOT BE CLEANED USING WATER JETS.
Do not install the appliance in rooms where water jets are used for cleaning.
THE APPLIANCE MUST BE CLEANED PERIODICALLY BY SKILLED TECHNI-
CAL PERSONNEL ONLY.
Use perfectly clean, disinfected cloths or brushes for cleaning.
Do not use abrasive products as these are liable to take the sheen off shiny parts.
Hopper
Wash the hopper once it has been removed from the appliance (unscrewing the
relevant fastening screw), using neutral soap and water, rinse abundantly with
lukewarm water and dry thoroughly.
It is advisable to clean the hopper periodically.
Once the hopper has been cleaned, it must be attached to the upper grinding blade
holder using the relevant screw.
11